Stupid Wheel
#1
Rotary Enthusiast
Thread Starter
Join Date: Mar 2003
Location: STL Area
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
Stupid Wheel
I left my car outside for a year and a half and now, the wheels are frozen to the rotors. How can I get those off? If you have any ideas, that would be helpful.
I tried searching and didn't find anything. There are just the 5 lugs for the wheels, right?
I tried searching and didn't find anything. There are just the 5 lugs for the wheels, right?
#2
RX-7 Bad Ass
iTrader: (55)
Yep, undo the 5 lugs, then get a rubber mallet and tap the back of the wheel's lip while spinning the wheel. That should pop it loose.
Once the wheel is off, get a wire brush and clean all the rust and whatnot off the hub surface.
Dale
Once the wheel is off, get a wire brush and clean all the rust and whatnot off the hub surface.
Dale
#6
Rotary Enthusiast
Thread Starter
Join Date: Mar 2003
Location: STL Area
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DjRannyKan
y was the car sitting out for so long (if u dont mind me asking)???
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM