Stupid Vacuum Chamber
#1
Stupid Vacuum Chamber
Alright guys i need some help for the moment....im trying to take out the vacuum chamber...i already have the alternator off and the elbow and not sure if i have to take the rest of the belts off or not to take the damn thing off? i looked through iluvmyrx7 and tried looking at the manual but couldnt find it?
#2
Moderator
iTrader: (7)
Alternator, and the engine lift bracket. There are two screws holding the chamber - one holding it underneath the oil filler neck, and one on the front directly into the engine block.
I didn't need to remove anything else, but that screw under the filler neck can be tricky.
Dave
I didn't need to remove anything else, but that screw under the filler neck can be tricky.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM