3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Strange Noise After Greddy E-01 And Boost Guage

Thread Tools
 
Search this Thread
 
Old 05-30-04, 01:28 PM
  #1  
Full Member

Thread Starter
 
Join Date: Mar 2003
Location: Silent Hill
Posts: 206
Likes: 0
Received 0 Likes on 0 Posts
Strange Noise After Greddy E-01 And Boost Guage

I have been getting this strange cracking noise from under the hood since i installed the greddy e-01 and greddy electronic boost guage...At first i thought it was the exhuast gasket on the manifold.. but it used to do it just once when i boosted for the first time.. sometimes twice but after that it would be fine... now i have installed a single turbo and changed all the gaskets still i get that cracking noise the first time i boost.. what can it be?? it also feels like it is coming from where i have mounted my greddy boost solonoid and boost guage.. but for now the boost solonoid is disconnected as i am running the turbo just on the wastgate for now but the E-01 is powered up cuz i am used to monitor the boost from it... the noise is still there..
Old 05-30-04, 01:42 PM
  #2  
flying apex seal

 
racer1's Avatar
 
Join Date: Jul 2003
Location: Cyprus
Posts: 747
Likes: 0
Received 0 Likes on 0 Posts
Well, maybe you unscrewed something when you installed the solenoid and you didn't screw it back?

Thats the only thing it comes in my mind
Old 05-30-04, 08:30 PM
  #3  
Full Member

 
sanfordman's Avatar
 
Join Date: Apr 2002
Location: raleigh, nc
Posts: 176
Likes: 0
Received 0 Likes on 0 Posts
Take a look at your wiring and make sure your selonoid is hooked up correctly. Especially check the grounded wires. That would cause the selonoid valve to go nuts and make that clicking sound. I am pretty sure my e-o1 made that noise when I first intalled it, but I forgot exactly how I fixed it.
Old 05-31-04, 02:02 AM
  #4  
Rotary Enthusiast

iTrader: (12)
 
darkside7's Avatar
 
Join Date: Jan 2002
Location: tx
Posts: 1,199
Likes: 0
Received 0 Likes on 0 Posts
the clicking noise is your preofec selonid working...
Old 05-31-04, 03:56 AM
  #5  
Full Member

Thread Starter
 
Join Date: Mar 2003
Location: Silent Hill
Posts: 206
Likes: 0
Received 0 Likes on 0 Posts
But it is very loud the first time i boost.. i'll check my wiring now... thanks
Old 05-31-04, 11:06 PM
  #6  
Still on 1st engine

 
InsaneGideon's Avatar
 
Join Date: Jun 2003
Location: SoCal
Posts: 1,176
Likes: 0
Received 0 Likes on 0 Posts
When you said "cracking noise noise from under the hood" I immediately thought of detonation.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Ian_D
Single Turbo RX-7's
25
10-14-15 12:31 PM
gabescanlon
3rd Generation Specific (1993-2002)
7
09-05-15 12:09 AM
83revival
New Member RX-7 Technical
4
09-03-15 10:42 PM



Quick Reply: Strange Noise After Greddy E-01 And Boost Guage



All times are GMT -5. The time now is 10:45 PM.