I'm trying to remove my stock headlight assemblies, how the hell do you do this?

since my battery is out, i'd like to do it without having to pop them up

does anyone have a how-to on this/ i checked all of the major sites, and even iluymyrx7.com doesn't have it in the manual

weird

help!

 

I had to pop the head lights up to get my assemblies out.

 

The stock lights mount to the frame via these two holes (pic is with lightst removed)


From rotaryextreme.com

 

If this site ever works...I'll post the link to the thread.

Lol...uhhh...911? I don't think that helped him too much...lol.

 

Have to remove the cover. You WILL have to adjust the position. Here's a little bit...

https://www.rx7club.com/forum/showth...hreadid=190912

I think there are 8 total. 4 on top just behind the cover, 3 facing the center of the car and one underneath the assmbley facing the front. You'll have to bring it all the way up to get to it. And yeah, they're all 10mm.

 

Why not? It shows him the two bolts he needs to get to, clear as day. It helps quite a bit if you know what you're looking for.

 

Yes, but there is a lot more to it.

 

Fine, screw you guys, I was trying to help.

 

and i appreciate it, this sucks, how would you pop up the headlights if you had removed the ignition harness?

 

You can pop the lights up mannualy, look around the coolant over-flow bottle and you should see a red ***(turn it clock-wise to pop the lights) coverd by a rubber cap. This is same on the other side by the windshield washer bottle.

 

sweet thankx

 

Oh come on...I didn't mean it like that. You had some cutting done it looks like. Those you pointed out were the top most bolts. The one in front that's hidden and the few on the side wern't shown...