Stock exhaust gasket size?
#1
Full Member
Thread Starter
Join Date: Nov 2013
Location: United States
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Stock exhaust gasket size?
Hey guys real quick, I need to replace my gaskets to my exhaust its stock and I wasn't sure what size to get? It's all stock and I need the gaskets from the downpipe (cat) to the mid pipe (other cat) then from that to the muffler. Can anyone help me out with an answer? I've only been reading how guys just change their exhaust no info on the actual stock size.
#4
SAE Junkie
iTrader: (2)
If LHD and RHD are the same I might have some scans of these.
There are 3 gaskets I have found out
Normal 3" 2 bolt flange (aftermarket)
Factory FD3S
Japanese 80mm gaskets (factory bolt pattern but do not seal against factory flanges or gaskets).
Factory gaskets do not work with all the aftermarket Japanese catbacks and mid pipes I have tested.
There are 3 gaskets I have found out
Normal 3" 2 bolt flange (aftermarket)
Factory FD3S
Japanese 80mm gaskets (factory bolt pattern but do not seal against factory flanges or gaskets).
Factory gaskets do not work with all the aftermarket Japanese catbacks and mid pipes I have tested.
#5
Full Member
Thread Starter
Join Date: Nov 2013
Location: United States
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
If LHD and RHD are the same I might have some scans of these.
There are 3 gaskets I have found out
Normal 3" 2 bolt flange (aftermarket)
Factory FD3S
Japanese 80mm gaskets (factory bolt pattern but do not seal against factory flanges or gaskets).
Factory gaskets do not work with all the aftermarket Japanese catbacks and mid pipes I have tested.
There are 3 gaskets I have found out
Normal 3" 2 bolt flange (aftermarket)
Factory FD3S
Japanese 80mm gaskets (factory bolt pattern but do not seal against factory flanges or gaskets).
Factory gaskets do not work with all the aftermarket Japanese catbacks and mid pipes I have tested.
Thread
Thread Starter
Forum
Replies
Last Post