I'm about to remove my stock catback and was hoping somebody remembered if you need a dremel or some other cutting tool to remove it. Once you unbolt it from the center section, do the hangers slide right out of the rubber holders or do they have to be cut out? And what size are the bolts that attach it to the center section? 15mm?

 

The rubber hanger come off but they do not "just slide right off" they are a biotch, then you have to get them back into the new parts. Fun Fun. but it isn't hard just get under there and do it.

 

If you cut the hangers you will just have to buy new ones. Spray lots of lube on the hanger and puuuulllllllllll (they slide out). I think they are 14mm bolts.

 

Thanks.