Stock catback removal
01-12-02, 01:46 PM
#1
Chimera Driver
Thread Starter
Join Date: Jul 2001
Location: Birmingham, AL
Posts: 1,334
Likes: 0
Received 0 Likes
on
0 Posts
Stock catback removal
I'm about to remove my stock catback and was hoping somebody remembered if you need a dremel or some other cutting tool to remove it. Once you unbolt it from the center section, do the hangers slide right out of the rubber holders or do they have to be cut out? And what size are the bolts that attach it to the center section? 15mm?
01-12-02, 01:52 PM
#2
Hi sir
Join Date: Feb 2001
Location: Modesto/Rancho Cordova CA
Posts: 443
Likes: 0
Received 2 Likes
on
2 Posts
The rubber hanger come off but they do not "just slide right off" they are a biotch, then you have to get them back into the new parts. Fun Fun. but it isn't hard just get under there and do it.
01-12-02, 01:53 PM
#3
Z06 powered FD
Join Date: Mar 2001
Location: Dallas, Texas
Posts: 1,883
Likes: 0
Received 0 Likes
on
0 Posts
If you cut the hangers you will just have to buy new ones. Spray lots of lube on the hanger and puuuulllllllllll (they slide out). I think they are 14mm bolts.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM