Starts then dies.
#26
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: Tennessee
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Well i tore through the garage yesterday and couldnt find my stock map sensor. I have a friend that has a datalogit but has never used it and doesnt have the software. Is there any where i can download the software online?
BTW thanks for all the comments.
BTW thanks for all the comments.
#29
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: Tennessee
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
So to update this, I figured out the fuel pressure problem. The return hard line right before the fuel pump was clogged. Now i have it down right where it should be. I have borrowed a datalogit from a friend and another member emailed me a link for the FC edit software which i downloaded. Now i am just waiting on the USB to serial cable to arrive in the mail, should be here any day now. Hopefully this will do it. If any of you guys are good with the PFC, will you look at my post in the PFC section and let me know if I am entering the calibration in the right field?
#30
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: Tennessee
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Another update, the cable i bought for the datalogit must be bad. I have tried it with 3 different laptops and none will recognize the drive when i plug it in. I bought a stock MAP sensor and soldered it in and she fired right up!!! First time in 4 years! I let it idle for about 10 minutes while adding coolant. Next thing to do is get it off jack stands, double check everything and go for a slow drive around the block. I am expecting to find some more bugs to workout but at least its running! Thanks for all the help everyone.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM