3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

starter not firing 100% WTF

Thread Tools
 
Search this Thread
 
Old Oct 22, 2006 | 08:12 PM
  #1  
zoomzoomkid's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 42
Likes: 0
From: texas
starter not firing 100% WTF

ok here's a list of new stuff on my car.
reman from mazda
new main harness
dp+high flow cat+rb exhaust
apexi dual intakes
new clucth
new trany fluid
new gtx oil
brand spanking new starter switch (stering colum)


ok now the problem.... we put in the new engine a few weeks ago it started on the first try. everything on the old engine worked great, however now the starter motor doesn't fire all the time. it won't even make a clicking sound! I did a search but all the people who seem to have a similar problem have a PFC, I still have my stock ecu. I've also noticed that the security light doesn't come on, but it does make the 'beep' sound. could the security system think that somethings wrong and it's telling the ecu not to turn the starter? I had the starter testing today and the guy at advanced said a new starter wouldn't perform any better than the one I have. any ideas???????
Reply
Old Oct 22, 2006 | 08:31 PM
  #2  
IRPerformance's Avatar
Sponsor
iTrader: (41)
 
Joined: Apr 2003
Posts: 11,347
Likes: 321
From: NJ
You probably left something unplugged. Trace the battery harness down to the starter. Get under the car with a volt meter and see if you have 12v at ther starter terminals with the ingiton on and cranking. Also, you're going to be replacing the motor again very soon with the stock ecu and mods.
Reply
Old Oct 22, 2006 | 09:02 PM
  #3  
zoomzoomkid's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 42
Likes: 0
From: texas
old motor went bad due to horrible rebuild from previous owner, he reused all the old seals and gaskets. already checked and rechecked all plugs and connectors near the starter.
Reply
Old Oct 22, 2006 | 09:10 PM
  #4  
PhDMDRX7's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Apr 2006
Posts: 162
Likes: 0
From: St. Louis, MO
If it at least gives you a "click" sound, its likely just a dirty 12v connection on the starter. If it doesn't even click, I agree that its a bad or missed connection: clutch switch for example.
Reply
Old Oct 22, 2006 | 09:12 PM
  #5  
zoomzoomkid's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 42
Likes: 0
From: texas
checked and replaced starter switch on stering colum, checked and cleaned clutch switch, cleaned and tested starter motor.
Reply
Old Oct 22, 2006 | 09:47 PM
  #6  
zoomzoomkid's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 42
Likes: 0
From: texas
the only thing i can think of that wasnt pluged in was next to the ecu there is a small black wire ( female clip) that reads 12v's. i have no idea where that thing plugs into???? also my display on my radio isnt bright even with the lights on its dull. also mention up top is that my secuity light doesnt come on after i lock the car? it beeps but no flashing red light... could all this be linked to that black plug?
Reply
Old Oct 22, 2006 | 10:10 PM
  #7  
Busted7's Avatar
Will work for horsepower
Tenured Member 10 Years
 
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Sounds like it could be the ground! The grnd to the block.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
windom
Adaptronic Engine Mgmt - AUS
4
Sep 11, 2015 04:48 AM
t-von
3rd Generation Specific (1993-2002)
9
Sep 10, 2015 01:56 PM




All times are GMT -5. The time now is 07:16 AM.