jajiddam

When I depress my clutch all the way down, I hear a faint but distinctive squeaking sound coming from underneath the drivers side underbody. It almost just seems like I just need to oil something down there

I just flushed out my clutch and diff fluids. Anyone know how I can fix this??

Also, if I were to replace my clutch with a more heavy duty on, what exactly does this replace?? Is it the entire system?? Any help appreciated, thanks guys

Mike

Gibenstein

iTrader: (2)

I bet its your throwout bearing.

SBi_Owner

I agree. You replace the pressure plate, friction plate, TO bearing, pilot bearing and seal. You also want to do a good check of the clutch arm for cracks. You may also find that you need to have the fly wheel resurfaced if it is in bad condition.

Gibenstein

iTrader: (2)

Is it sound like a squeel or a rolling sound ? Does it stop when you hold it down after a while ? If its a roll and stops when you disengage your clutch I bet its your throwout bearing.

Gremlin1802

Check your clutch fork also. Just replaced mine. :|

jabob33

mine is squeaking also but i doubt it is the throwout bearing cause i just put in a new clutch and reman in jan

spurvo

HA HA, my car sounds like a little mouse is getting squeezed when I put in my clutch. The pedal pivot needs a 'lil grease. Poke your head down into the foot well and push on the clutch pedal. Make sure it's not what I've got above...

jajiddam

will upgrading my clutch include all the fixes described above?? damn, didn't know so many things were involved w/ the clutch

jon88se

Um, I bet it's just the clutch pedal mechanism that needs a shot of lub or cleaning.

RotorJoe

Is the clutch pedal make noise as you press on it and then stop once it is at the floor?
Or does it make noise when the clutch is out and not when the clutch is in?
Sence you replaced everything (make sure you trust you mech.) it sounds to me like the pedal piston could use a shot of lube.

aREX4X

I noticed this too.

X...