Spark Plug Question?
I ordered some spark plugs from Jason at RX7Store and I told him to send me what he recomends. I gave him my mods and all. Well anyways, I recieved them today and I got 2 - BUR9EQ and 2 - BUR7EQP. So can I run two platinums and two non-platinums. Is that good for the car? I was going to install them today but now I want to hear some feedback first. Please let me know if this is OK or if I should swap them for different ones. I contacted Jason a little bit ago so I have not heard back from him yet. Thanks
Unless you're running higher boost >12psi I would stay with the 7's and 9's. If you're running higher boost regularly go with all 9's. And no, there shouldn't be a problem with mixing platinum and non plugs.
Cool, someone is finally answering my question. I run 12psi now but I plan on upgrading my secondaries this summer and retuning my PFC to accomadate for more boost. Right now though since I will only run 12 psi then these will be ok? I don't want to install them and have some type of weird problem. any help is great. Thanks
Trending Topics
Originally posted by gmonsen
personally, i'd be uncomfortable with 7's and 9's. 9's all around or even 9.5's amd 9's. it never hurts to go a click colder. -gordon
personally, i'd be uncomfortable with 7's and 9's. 9's all around or even 9.5's amd 9's. it never hurts to go a click colder. -gordon
Originally posted by gmonsen
zoom: i don;t know. he's got a ported motor, midpipe, catback setup at 12 psi... i don;t think he will foul the plugs with that running 9's all round. you do? (i admit that i had moidded soprt turbos, downpipe and running 14 psi in early 1997... so, may not have good experience base by this time on his setup.) -gordon
zoom: i don;t know. he's got a ported motor, midpipe, catback setup at 12 psi... i don;t think he will foul the plugs with that running 9's all round. you do? (i admit that i had moidded soprt turbos, downpipe and running 14 psi in early 1997... so, may not have good experience base by this time on his setup.) -gordon
1JZ powered
Joined: Jul 2001
Posts: 4,423
Likes: 0
From: Where there's only two seasons, hot and wet! I love Okinawa
Originally posted by Import Convert
IMO, you should run all BUR9EQP. Especially with your mods. I'd just order them from a local NGK dealer. I got mine for $8.50 each at Napa.
IMO, you should run all BUR9EQP. Especially with your mods. I'd just order them from a local NGK dealer. I got mine for $8.50 each at Napa.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM






