3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Spark, but no start ?

Thread Tools
 
Search this Thread
 
Old 08-15-10, 12:17 PM
  #1  
Junior Member
Thread Starter
 
Lain0016's Avatar
 
Join Date: May 2010
Location: Tuscon,AZ
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Spark, but no start ?

I was driving around town for a while, i went home, left the turbo timer on at 3:00, shut the door and locked and proceeded about my way. I had a few friends over for dinner and one asked to go for a ride...sure as Sh*t i go to the start car, no go. It just cranks over and over with no sign of firing. So i pulled did the whole EGI pull and tried that, no go. Pulled the start plugs, they looked used but nothing fouled. Figured i try the engine oil in there and all that. Still nothing. I then decided to see if im getting spark, i pulled a lead plug and had my wife turn it over while i stuck a screw driver at the end of the spark plug, needless to say i got shocked, but i have spark going through the plug. So i have no idea whats next, fuel injectors? Fuel pump? The PFC is reading 1.7% while im cranking it, and the battery started out at 12volts, its at like 9.8 now due to trying numerous deflooding procedures....so guys any advice?
Old 08-16-10, 10:39 PM
  #2  
Senior Member

iTrader: (4)
 
sbnrx7's Avatar
 
Join Date: Feb 2007
Location: Tallahassee, FL
Posts: 442
Likes: 0
Received 6 Likes on 5 Posts
First I would also check the operation of the fuel pump relay (Located next to the EGI relay). If that's ok, verify fuel supply next by checking fuel pressure.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
10-13-15 01:57 PM
gxl90rx7
Haltech Forum
4
09-14-15 03:09 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
09-07-15 11:50 AM



Quick Reply: Spark, but no start ?



All times are GMT -5. The time now is 10:01 PM.