Okay so I'm freaking out a little. I am almost done with the rebuild and I am running Non-sequential all properly done. I read this from Rotary Resurrection in his None sequential write up: "Don’t forget the black plastic spacer that goes under the primary rail." So I don't have a plastic spacer on the FD, but I do on the FC. Now I'm thinking, WTF did I do with the spacer but cant remember taking one off. Help me out here people that know. Does the FD have a plastic spacer under the primary rail? Thanks.

 

Yes, there is a plastic black-colored spacer between the block and the rail. Check out this thread: https://www.rx7club.com/3rd-generati...e-up-*-549019/

theres a good picture of it in the 4th picture from the top.

 

Wellllll sheeeet! I swear it wasn't there when I took it off. Maybe it was. Anyway, it has grown wings and has disappeared so I guess I better buy another. Thanks for the fast reply.

 

you can get one from Full Function Engineering

13B Primary Fuel Rail Spacer | Full Function Engineering

 

It is the same as the one on the FC.