Small FD photoshoot
#29
Full Member
iTrader: (2)
Join Date: Jun 2005
Location: clermont fl.
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RX7 RAGE
racing beat springs with bilstein struts...very stiff and low and I do have to be very careful for bumps and potholes
front looks mad low. lower dan mine with h&r all around wich is suppost to be 1.5" all around. does racing beat sag??? or am i missing something?
#30
Rotary Enthusiast
Join Date: Oct 2002
Location: fly over state
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
Racing beat sags although they claim the compression rate is still good when you send a questionable spring to them. It seems to be a racing beat/bilstein combo issue. Other shocks do not seem to have the issue.
I went through a whole warranty issue with both racing beat and bilstein and no one fessed up to what caused marked drop in ride over the course of a year. Radkins dropped so much his wheel ate the fender liner. The drop is worse on the drivers side
The issue has been well documented in the suspension section. The problem is worse for guys who track. About 5 of us switched to HR springs due to the problem.
I went through a whole warranty issue with both racing beat and bilstein and no one fessed up to what caused marked drop in ride over the course of a year. Radkins dropped so much his wheel ate the fender liner. The drop is worse on the drivers side
The issue has been well documented in the suspension section. The problem is worse for guys who track. About 5 of us switched to HR springs due to the problem.
Thread
Thread Starter
Forum
Replies
Last Post