Cccid

I was going to replace my wiper blade today... so i dig up the user manual and i couldnt find the size of the blade (i double read the whole book like twice).

So i went to a shop.. the guy there get a Borch manual, and told me mine was 20" (driver) and 18" (passanger). i bought the thing home and i install them

soon to figure out the blade's length was not the same as the mark on the windshield....


(i search and search the forum for hours... the only thing i saw is someone mention that it was 19" ?)

Can someone officially clearify the size / length of the 2 wiper blade?

Thank you very much ><

SLOASFK

iTrader: (5)

I just changed my wiper blades. I bought 2 20" RainX blades, per the book they had. The passanger side blade sticks out a tiny bit, so I think 19s should be about right.

paradoxbox

I have another question about the wipers, how do you get the wiper arms off on these cars?

turboIIrotary

iTrader: (9)

loosen the bolt holding them on.

paradoxbox

I understand that much, but the issue is I don't know how to get at the bolts, the bottom part of the arms don't seem to pop off or pivot on a hinge like any other car I've had before. Are they supposed to?

cewrx7r1

iTrader: (2)

Why couldn't your measure the ones that were already on your car?

cewrx7r1

iTrader: (2)

You remove the cap to expose the nut. Let's see if you can figure the rest out on your own.

SLOASFK

iTrader: (5)

Chuck, you shouldn't pick on the newbs.

dhays

iTrader: (1)

Open the hood and look at the base of the wiper. There is a rubber cap over the bolt. Take off the cap, remove the bolt, and take off the wiper arm. I did it a couple weeks ago to repaint my wiper arms. Here is a pic of the passenger side arm.

cewrx7r1

iTrader: (2)

A little time spent doing some analysis and investigation (logical deduction) helps build character.

Since when are wiper blades brain surgery?

paradoxbox

Since when do you have to be ******** about it? Irritating. Seems you've made 3 posts to this thread without helping out much, how bout just finding a different thread to pollute.