Silicone lines for fuel?
#1
Full Member
Thread Starter
Join Date: Nov 2002
Location: CHICAGO
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Silicone lines for fuel?
I am in the middle of a hose job. I had to remove a line at the rear of the engine compartment to get to one of the solenoid rack bolts. I kind of ripped the end of it when I removed it and should replace it. Can I use a silicone line for a fuel line or not?
Thanks
Thanks
#2
fart on a friends head!!!
oh hell no!!!!! go get some fuel line (5/16 id) and replace it with that. just get the rubber "fuel line" from a parts store. later. . . i expect you will upgrade your fuel line to a more suitable ID and material. haha.
paul
paul
#3
Full Member
Thread Starter
Join Date: Nov 2002
Location: CHICAGO
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. I didn't think so. I am actually an engineer in the plastics molding industry but I have never worked with silicone. I will replace it with fuel line. Thanks again.
Glen
Glen
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM