Shifter base screw size?
#1
Shifter base screw size?
Does anybody know the screw size that is used from the shifter base to the tranny, I need the pitch and the lenght if you have it.
Reason is when I sold my stock shifter I gave the screws too, I have a B&M for now and changing it to a C's Shifter, I have the base that I bought but don't have the screws to bolt it down to the tranny.
Many thanks in advance.
Kai
Reason is when I sold my stock shifter I gave the screws too, I have a B&M for now and changing it to a C's Shifter, I have the base that I bought but don't have the screws to bolt it down to the tranny.
Many thanks in advance.
Kai
#5
Sponsor
iTrader: (41)
Depends which ones you are talking about. The 3 that hold the actual shifter to the base are m6x1.0 and have a 10mm head. The 4 that hold the base to the trans are m8x1.25 and have a 12mm head. Since you need to remove the stock base to mount the B&M I assume you need the m8x1.25.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM