Secondary injector play...
#1
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Chicago, IL
Posts: 1,462
Likes: 0
Received 0 Likes
on
0 Posts
Secondary injector play...
I bought a set of kgparts fuel rails and 1600cc injectors. I just dropped them into the secondary injector holes and bolted on the rail. But the injectors move freely back and forth(meaning left and right) is this bad? Will they leak?
Edan
Edan
#5
Tony Stewart Killer.
iTrader: (12)
yeah totally
you put it in around the tip of the injector and then it goes into the rail
mine still move around left to right though
crank the fpr a few good turns to get high pressure and pressurize your fuel system with a paperclip connect the gnd and fp in the diagnostics box over and over and see if it leaks
but yeah talk to keith about that asap and see if you are missing anything else as well
you put it in around the tip of the injector and then it goes into the rail
mine still move around left to right though
crank the fpr a few good turns to get high pressure and pressurize your fuel system with a paperclip connect the gnd and fp in the diagnostics box over and over and see if it leaks
but yeah talk to keith about that asap and see if you are missing anything else as well
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM