searched no result....bosch coils.
04-25-05, 08:41 PM
#1
I'm sorry wha?
Thread Starter
searched no result....bosch coils.
Has anyone used a the bosch coils for their leading coil replacement? The reason I ask is because i think I got a cruddy TII leading coil and was wondering if anyone used them since the price is very decent. I would be hooking it up to a ignition amp though.
04-25-05, 09:26 PM
#2
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
Sorry no Bosch coils here . I have just put in 4 Jocobs coils .Two for the leading and one each for the trailing . Their model C-4 and put out 65000 volts each with an amp .I know the old Bosch blue coils were high out put and did not leak on high vibration motors .
04-26-05, 09:41 PM
#4
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
I am using a four channel duel cap amp from AEM . The last one they sent me is working . The two trigger wires for one cap are tied together and the 540 volt out put wire is sent to each pos of the two leading coils . The spark of this set up is great . Time will tell how it will endure . This was not easy to install ,the coils are large and the room is limited .It took several design changes before I hit on the way I was satisified . You can see two coils from the top and they look impressive .
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
8
10-02-15 08:08 AM