search disabled?? need help finding turbo control solenoid
#1
Full Member
Thread Starter
Join Date: Feb 2005
Location: new zealand
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
search disabled?? need help finding turbo control solenoid
hey people, I am having problems with my primary turbo not boosting, have done some research, and found the ccv actuator did not move in with the key on off test, so i cable tied it shut and went for a test run and am showing boost now on the primary turbo, my thought is that it is the trubo control solenoid, which is the one marked e on the vacuume diagram (3rd one in from left on the bank of solenoids) but i am unable to locate the bank of solenoids lol
The search funtion is telling me it is disabled so i cannot search hence this post, any help would be appreciated,
I have a 1999 type r, if any other info is required please let me know
Thanks Mark
The search funtion is telling me it is disabled so i cannot search hence this post, any help would be appreciated,
I have a 1999 type r, if any other info is required please let me know
Thanks Mark
#2
Full Member
Thread Starter
Join Date: Feb 2005
Location: new zealand
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
I believe that i have found it in the down loaded version of the fsm, if i understand it correctly, i will need to remove the upper intake manifold and a fair bit of other stuff to gain access to them, is that correct ?
Thanks Mark
Thanks Mark
#7
Full Member
Thread Starter
Join Date: Feb 2005
Location: new zealand
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, just been to local mazda place to try and figure out as rynberg said the intergrated plastic box of solenoids.... there is 7 in the box but their diagram couldnt tell me which is which?? is there anywhere i can get a fsm for the 99?
And jd to rescue thanks for the info i only thought that solenoid would be the prob as i had read it in another post, but seems my solenoid setup is different, so i will keep looking
Thanks Mark
And jd to rescue thanks for the info i only thought that solenoid would be the prob as i had read it in another post, but seems my solenoid setup is different, so i will keep looking
Thanks Mark
Thread
Thread Starter
Forum
Replies
Last Post