Rx7 fd3s power windows/indicators/not working
#1
Newbie
Thread Starter
Join Date: Sep 2021
Location: cyprus
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Rx7 fd3s power windows/indicators/not working
Hey guys Im having a promblem with my fd. The car was sitting for some years now and I decided to fix it.
everything seems to work except my power windows/indicators and hazaards. I checked the fuses under the dash and they are ok. Did anyone have the same issue?
everything seems to work except my power windows/indicators and hazaards. I checked the fuses under the dash and they are ok. Did anyone have the same issue?
#2
RX-7 Bad Ass
iTrader: (55)
That's not going to be super common, and with a car that has sat you may have problems like a mouse chewed on wiring or something like that.
Is the car all in one piece or was it taken apart and is still partially apart?
If the car is/was lowered, sometimes the driver's side front wheel can rub through the fender liner and into the wiring harness.
How did you check fuses? Best way is to set a multimeter to continuity and touch the 2 test spots on the top of the fuse, if the meter beeps that fuse is good. Pulling them and looking does OK but many times you can't see where the fuse is melted through.
Dale
Is the car all in one piece or was it taken apart and is still partially apart?
If the car is/was lowered, sometimes the driver's side front wheel can rub through the fender liner and into the wiring harness.
How did you check fuses? Best way is to set a multimeter to continuity and touch the 2 test spots on the top of the fuse, if the meter beeps that fuse is good. Pulling them and looking does OK but many times you can't see where the fuse is melted through.
Dale
#3
Newbie
Thread Starter
Join Date: Sep 2021
Location: cyprus
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
We checked for mice bites and we found nothing.
I also checkedthe fuses with a multimeter and agin everything seems ok.
The only thing is that i can locate the cpu2 (fd01) flasher on my car its not there where its should be!
I also checkedthe fuses with a multimeter and agin everything seems ok.
The only thing is that i can locate the cpu2 (fd01) flasher on my car its not there where its should be!
#4
RX-7 Bad Ass
iTrader: (55)
Yeah the flasher has to be plugged in for the turn signals/hazards to work, that's the circuit that drives them and makes them blink.
Dale
Dale
Thread
Thread Starter
Forum
Replies
Last Post