Running six injectors questions...
#1
Junior Member
Thread Starter
Join Date: Jan 2019
Location: Fremont California
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Running six injectors questions...
So, I have some questions about running 6 injectors in a xcessive LIM. I've read a lot of threads on here and I still have some questions.
The car is getting a built motor, a 8374 glease manufacturing turbo kit, and the xcessive LIM. I am running ffe step up kit with 500 primaries and 2000 secondaries. I am planning on running a radium dual pump setup. I want to upgrade the fuel system even more and potentially run 6 injectors (2x1000, 4x2000)... Now here are my questions...
I'm planning on switching out the pfc for a haltech. The 1500 supports 4 injector drivers and the 2500 supports 8... With 6 injectors do I need the 2500 then?
How do I wire up the two extra injectors?
If I'm planning for 500+whp on e85... Is it even necessary to run 6 injectors? What else would I need to do to run e85?
Thanks
The car is getting a built motor, a 8374 glease manufacturing turbo kit, and the xcessive LIM. I am running ffe step up kit with 500 primaries and 2000 secondaries. I am planning on running a radium dual pump setup. I want to upgrade the fuel system even more and potentially run 6 injectors (2x1000, 4x2000)... Now here are my questions...
I'm planning on switching out the pfc for a haltech. The 1500 supports 4 injector drivers and the 2500 supports 8... With 6 injectors do I need the 2500 then?
How do I wire up the two extra injectors?
If I'm planning for 500+whp on e85... Is it even necessary to run 6 injectors? What else would I need to do to run e85?
Thanks
#2
Sponsor
iTrader: (41)
You can buy splitters and tie the secondaries in pairs. Running 6 injectors will help atomization and distribution over just 4. If you have the provisions you might as well. No reason to get the 2500 over the injector outputs alone unless you need some of the other capabilities.
Thread
Thread Starter
Forum
Replies
Last Post