rmp gauge not working
#1
Full Member
Thread Starter
Join Date: Jul 2005
Location: salt lake city, Utah
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
rmp gauge not working
i just put a new motor in my 95 fd... and the gauge cluster isnt working... rmp speedometer ect.... anyone know where the problem might be?
Trending Topics
#9
Mr. Links
iTrader: (1)
Originally Posted by bryant
also have haltech could that be something?? with the rpms
#12
Powered by** Rotary
my buddy and i just had the same problem. It ended up being the connector behind the Ecu we forgot to plug in... When you turn the key acc it works fine, but when you start it it goes down...
We found the connector hidden in there and it was unpluged....
We found the connector hidden in there and it was unpluged....
#13
Full Member
iTrader: (3)
Yep, that was my prob too. It's easy to overlook.
White plug on the engine harness that plugs into the dash loom. Has a foam tape around the plug itself.
Symptoms of this are:
* No Speedo
* No Tach
* Oil pressure gauge reading high
* No Temp Gauge
* Odometer goes out once you start the car
White plug on the engine harness that plugs into the dash loom. Has a foam tape around the plug itself.
Symptoms of this are:
* No Speedo
* No Tach
* Oil pressure gauge reading high
* No Temp Gauge
* Odometer goes out once you start the car
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM