want to install te blitz sbc id iii unit need the install write up thread thanks

 

monday bump!!!! anyone has a write up

 

Theres a manual on blitz's website. All you need is power and ground. In goes to any vacuum source and out goes to the wastegate.

 

here's a install diagram from the HKS EBC6. there's 2 nipples on each actuator, this image shows one side. you'll need to plug up the other side nipples on each wastegate actuators or simply unplug your stock solenoid wires so they stay shut. if that other side isn't plug'd or stock solenoid opens as well, then it won't hold boost at all

as for wiring, do a search on ECU diagram to find which wires you need to tap in if it requires more than just power and ground.



hope this helps...

 

yeah if you look up any other ebc install it will be pretty much the same

 

Here you go, click on the PDF file

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/blitz-sbc-i-d-boost-controller-instructions-405403/

 

hey thanks guys for all the response, i guess i was looking for a thread of someone who actually installed one. or @ least a picture of the hookup points for the install.