3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Repolished UIM, TB, Elbow

Thread Tools
 
Search this Thread
 
Old Nov 20, 2004 | 12:25 AM
  #1  
Snook's Avatar
Thread Starter
Tony Stewart Killer.
Tenured Member 20 Years
iTrader: (12)
 
Joined: Mar 2002
Posts: 5,156
Likes: 4
From: London
Repolished UIM, TB, Elbow

I took these off for inspection and cleaning since I'm getting ready for my 2nd attempt at having the car tuned in a few weeks. Replaced the silicone lines again and ziptied them. Made sure block off plates were tight and sealed and basically that everything was solid. Cut some more stuff off the uim I didn't need (see if anyone knows what's missing)...I had already polished them about 5 months ago but I wasn't careful when I installed them so it had to be redone. Here's how it turned out:

http://plaza.ufl.edu/yanni25/7work/polished/upload.jpg

http://plaza.ufl.edu/yanni25/7work/polished/upload2.jpg

http://plaza.ufl.edu/yanni25/7work/polished/upload3.jpg

Last edited by Snook; Nov 20, 2004 at 12:28 AM.
Reply
Old Nov 20, 2004 | 12:28 AM
  #2  
CANRX7GX's Avatar
PREDATOR
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jun 2002
Posts: 966
Likes: 1
From: Canada
Like a mirror ... "drool" very nice
Reply
Old Nov 20, 2004 | 12:31 AM
  #3  
Snook's Avatar
Thread Starter
Tony Stewart Killer.
Tenured Member 20 Years
iTrader: (12)
 
Joined: Mar 2002
Posts: 5,156
Likes: 4
From: London
thanks buddy!

Also, I wanted to mention that if anyone wants to donate a O-ring that goes between the tb and elbow I'm all for it. I just bought a new one about 1000 miles ago! but it came out when I took the stuff apart and because it absorbed oil it no longer fits back into there!!

If anyone has an extra I'd appreciate it.

What a junk part.
Yanni
Reply
Old Nov 20, 2004 | 12:36 AM
  #4  
93silverbullet's Avatar
Living the dream...
Tenured Member 05 Years
iTrader: (7)
 
Joined: Oct 2003
Posts: 1,342
Likes: 2
From: Eugene, Oregon
Hey Yanni.. great job as always!

You did my TB a couple of months ago and it looks great! Thanks again and keep up the great work!

Richard.
Reply
Old Nov 20, 2004 | 03:25 AM
  #5  
F0RSAKEN's Avatar
Cheese
Tenured Member 05 Years
 
Joined: Aug 2004
Posts: 769
Likes: 0
From: Lynnwood, WA
I always knew my UIM/TB/Intake looked like ***, and you just proved me right. On that level I hate you, but the awsome job you did on yours totally redeemed you at the same time.
Reply
Old Nov 20, 2004 | 04:53 AM
  #6  
rotorbrain's Avatar
fart on a friends head!!!
Tenured Member 15 Years
 
Joined: Mar 2002
Posts: 4,104
Likes: 2
From: sheppard AFB, TX
hey, yanni. . . just wait till you see mine man. . . not polished, but equally as bling. HEHE. . . ill be sure to post about it later!!!

paul
Reply
Old Nov 20, 2004 | 06:53 AM
  #7  
stangkilr's Avatar
It's only got one turbo
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 362
Likes: 0
From: NJ
looks decent, but not great...
Reply
Old Nov 20, 2004 | 10:01 AM
  #8  
JaNusSolSumnus's Avatar
TRINGLS
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 1,053
Likes: 0
From: Clermont, FL
That looks great, wish I could send my parts to you but I cant afford to have the car down that long

~Kris
Reply
Old Nov 20, 2004 | 11:41 AM
  #9  
moehler's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
iTrader: (12)
 
Joined: Mar 2003
Posts: 2,319
Likes: 32
From: South Jersey
Originally Posted by stangkilr
looks decent, but not great...

your crazy. that's as good as it gets... I have a polished uim from "SurgeMonster" and it amazing. he does some great polishing.
Reply
Old Nov 20, 2004 | 12:53 PM
  #10  
Snook's Avatar
Thread Starter
Tony Stewart Killer.
Tenured Member 20 Years
iTrader: (12)
 
Joined: Mar 2002
Posts: 5,156
Likes: 4
From: London
Originally Posted by stangkilr
looks decent, but not great...
HAHA sounds like a comment I would give about someone elses car or work
I mean you should understand that its very hard to take pictures of polished parts and have it look exactly like in person.

Post up your manifold pics, lets see how its done because I want mine to be perfect as well!

Last edited by Snook; Nov 20, 2004 at 12:55 PM.
Reply
Old Nov 20, 2004 | 01:19 PM
  #11  
Scrapiron7's Avatar
STi Boxer power!
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,160
Likes: 0
From: Austin, TX
Originally Posted by stangkilr
looks decent, but not great...
Let's see yours if it's so much better..
Reply
Old Nov 20, 2004 | 01:19 PM
  #12  
scratchjunkie's Avatar
sexy no jutsu
Tenured Member 15 Years
 
Joined: Jun 2002
Posts: 1,578
Likes: 0
From: planet arium
Originally Posted by SurgeMonster
thanks buddy!

Also, I wanted to mention that if anyone wants to donate a O-ring that goes between the tb and elbow I'm all for it. I just bought a new one about 1000 miles ago! but it came out when I took the stuff apart and because it absorbed oil it no longer fits back into there!!

If anyone has an extra I'd appreciate it.

What a junk part.
Yanni
mail me a stamp and ill send you one via pm me if you want my addy
Reply
Old Nov 20, 2004 | 01:24 PM
  #13  
C-westin'FD's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 386
Likes: 0
From: Royal Kunia ,HI USA
Thumbs up

Damn!! Gotta wear shades to look at that!!! Very Nice!!!
Reply
Old Nov 20, 2004 | 01:24 PM
  #14  
1QWIK7's Avatar
White chicks > *
Tenured Member: 20 Years
iTrader: (33)
 
Joined: Jul 2003
Posts: 13,146
Likes: 1
From: Secaucus, New Jersey
nice yanni

how much? LOLOL
Reply
Old Nov 20, 2004 | 05:20 PM
  #15  
Snook's Avatar
Thread Starter
Tony Stewart Killer.
Tenured Member 20 Years
iTrader: (12)
 
Joined: Mar 2002
Posts: 5,156
Likes: 4
From: London
Paul lets see it!
Thanks everyone....richard, meohler and bricke your car looks sweet!!

scratchjunkie I owe you twice thanks so much

c-westin'fd are those just normal shades or Costa Del Mar Polarized ones that you need : )

Robby are you really looking to get parts polished? I had stopped doing it for a while and am trying to work on my car but now IS a good time since it's winter and you northern guys have your cars down. I'll pm you.

Yanni
Reply
Old Nov 20, 2004 | 05:36 PM
  #16  
luizajeff's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2003
Posts: 452
Likes: 0
From: Lynnwood, WA
NICE!!!!!! It can't get any cleaner! What's your secret?
Reply
Old Nov 20, 2004 | 06:19 PM
  #17  
nitrohaulik's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jul 2004
Posts: 201
Likes: 0
From: Fall River, MA
Can you PM me the info also, I would like to send you mine aswell if the price is right for me. thanks
Reply
Old Nov 20, 2004 | 07:02 PM
  #18  
BlueRex's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Sep 2004
Posts: 2,444
Likes: 0
From: Bay Area, CA
Everytime I see your polishing work I'm in ah of how nice it looks. Such clean shaves and a perfect mirror shine everytime.

I myself tried to polish my UIM and failed miserably . Now I'll have to send it off somewhere to have it professionally done.
Reply
Old Nov 20, 2004 | 08:31 PM
  #19  
RX-Racer's Avatar
Aoohh!!!
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 542
Likes: 0
From: Pacific Beach, CA
Originally Posted by BlueRex
Everytime I see your polishing work I'm in ah of how nice it looks. Such clean shaves and a perfect mirror shine everytime.

I myself tried to polish my UIM and failed miserably . Now I'll have to send it off somewhere to have it professionally done.
Me too! I tried and it just wasn't turing out the way it should. Anyone have a
way to do it. And "Dummies for polishing"

JP
Reply
Old Nov 20, 2004 | 08:47 PM
  #20  
BlueRex's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Sep 2004
Posts: 2,444
Likes: 0
From: Bay Area, CA
Originally Posted by RX-Racer
Anyone have a
way to do it. And "Dummies for polishing"
Among reading various threads and websites out there this how to on rob robinette's site is pretty useful:

http://robrobinette.com/polish.htm

I'm pretty sure I remember reading SurgeMonster's various polishing tips that are out there on this forum. In the end I still wasn't able to pull it off.
Reply
Old Nov 20, 2004 | 08:57 PM
  #21  
jspecracer7's Avatar
1JZ powered
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 4,423
Likes: 0
From: Where there's only two seasons, hot and wet! I love Okinawa
Damn...looks good!
Reply
Old Nov 20, 2004 | 09:03 PM
  #22  
particleeffect's Avatar
omgwtfposlol
Tenured Member 10 Years
 
Joined: Dec 2002
Posts: 862
Likes: 0
From: Orange City, FL
jesus man, they look chromed. i wonder if putting some rattle can clear on them would help them keep that shine. or you could just keep them wd40'd. seriously, did you chrome them?
Reply
Old Nov 20, 2004 | 09:16 PM
  #23  
mecman's Avatar
Senior Member
Tenured Member: 20 Years
iTrader: (12)
 
Joined: Jun 2001
Posts: 679
Likes: 24
From: Chicago, IL, USA
Yanni,

Nice job! Makes me jealous. I worked on my UIM but it was too much work. Looks much better but not the mirror job you did!
Reply
Old Nov 20, 2004 | 11:05 PM
  #24  
blueskaterboy's Avatar
Olympic Muff Diver
Tenured Member 10 Years
 
Joined: Apr 2003
Posts: 1,300
Likes: 0
From: Boston, MA
i'll give you my bumper if you polish my stuff!
Reply
Old Nov 20, 2004 | 11:29 PM
  #25  
areXseven's Avatar
il Cosa Nostra e vivo!!
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2003
Posts: 2,096
Likes: 1
From: Dove le cose sono fatte il vecchio moda il senso
Originally Posted by stangkilr
looks decent, but not great...
You will not find a better craftsman on our Forum!! GREAT JOB Surgy!!
Reply



All times are GMT -5. The time now is 01:25 AM.