I wanted to know if anyone has replaced the stock oil pressure and water temp gauges IN the cluster. I am not talking about putting gauges in a gauge pod, but replacing the ones in the cluster?
If anyone has done this please show a pic if you have one and let me know what gauges and adapters you used.
Someone said that they though you could do it with Autometer gauges but I would like to know fore sure before I spend the money.

Thanks!

BTW, it is a 93 FD.

 

It's been done. Read about it on this web site. Check search engine

 

Which website?

I tried a search and the returns were very unrelated.

I would appreciate any tips.

 

Hate to bump, but I still would like to hear if anyone has done this.

Thanks!

 

It may be a little high, but try the Veilside gauges. I'm almost certain that they are stock replacements.

 

Gordon Monsen (gmonsen) has Autometer gauges in place of all the stock ones... looks awesome like the rest of his car

there are some pics here:
http://groups.msn.com/poweraxel/gordonmonsenst78.msnw

 

one of the guys who did the a/c relocation mod also replaced the oil pressure gauge with an aftermarket one and mounted it in the stock location...i'm almost certain he did anyways (going from memory)

 

I did it and documented the AutoMeter swap... http://rx-7.lividandgifted.com/tech-current.html -- Sorry but I haven't finished the write up just yet but all the information you should need is there.

Donnie Garvich
'93 VR (started life as) Base
http://RX-7.lividandgifted.com