replacing oem gauges????
#1
Full Member
Thread Starter
Join Date: Mar 2006
Location: Nebraska
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
replacing oem gauges????
i am thinking of replacing the stock oil pressure and water temp gauges with two defi gauges. can i do this without running into many problems? i am going to mount three other defi guages on the a-pillar and would like to use the wasted space of the two meaningless oem gauges. does it look funny with two aftermarket gauges in the oem cluster(even though the black face defi's match very closely)?
#2
Full Member
Join Date: Sep 2006
Location: Caroga Lake , NY
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
#6
I'm in the process of doing the same thing, but i'm waiting for my gauges.. i test fitted it with another 52mm gauge and it looks like it should be okay with some filing/sanding of parts of the stock gauge housing, it doesn't actually look like too much of an issue..
Trending Topics
#8
Rotary Enthusiast
Here's what the Defi looks like mounted in the stock locations:
The Defi's come with senders that replace the stock ones. There's no bad effects of removing the stock ones because they send the signal to the dash, not to the computer.
Hope that helps.
Attila
The Defi's come with senders that replace the stock ones. There's no bad effects of removing the stock ones because they send the signal to the dash, not to the computer.
Hope that helps.
Attila
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM