One of my pos Precision Brakes front rotors had a failure, one of the hat mounting tabs broke, all the bolts sheerd off, and rotor dropped on my wheel. and I need a replacement asap.

I tried calling Precision Brakes Company to raise a little hell on the matter, but it seems as though they are out of business....go figure.

So, are there any companies out there that make a rotor in the size of 315mm x 32 mm, or do I have to buy the OEM style +99RZ rotors? I looked around and couldn't find any. Also, I would need them by July 22 as I have an event on that date.

Thanks.

 

Try N-Tech Engineering to see if Nick has any left in stock.

Jack

 

If you can't find anything else in the time frame you need, I have an extra pair of slightly used one piece OEM 99 spec rotors. I have them as spares but don't really need them.

 

Wasn't that GB based on Coleman rotors - hence:

http://www.colemanracing.com/catalog...p?cPath=28_471

Would be interested to know what rotor was used in the rears if anyone knows. The Brembo, Coleman and local DBA catalogues don't appear to have anything in that width, unless I'm missing something obvious.

 

Project Mu makes a turquoise (gay green) set. Two piece design for around $800 a pair.

Needless to say I ended up with the 99 OEM pair for $350 pair from Mazda Motorsports.

 

Thanks for the info guys. gracer7-rx7, I sent you a PM. I'm interested in those OEM +99 spec rotors. I'll probably upgrade sometime soon, but the OEM's should work fine for the time being.

 

I know this is kind of late for your event but just FYI... Corksport sells the AutoExec 2-piece rotors. Expensive but not as much as the project mu. Not sure if they stock them but I know that they can get the replacement rings as well.

http://corksport.com/store/category/...rx-brakes.html