rebuild my tranny can I use skf bearings?
#1
Senior Member
Thread Starter
rebuild my tranny can I use skf bearings?
I rebuild my tranny because it make noise when the car deceleration with 1 gear and 2 in.
My mechanic found that the first and the last bearing of center shaft is damage.
The problem is that mazda didnt have it in stock and I have to wait about 3-4 weeks so I would like to ask if someone have replace oem bearings with skf.
My mechanic found that the first and the last bearing of center shaft is damage.
The problem is that mazda didnt have it in stock and I have to wait about 3-4 weeks so I would like to ask if someone have replace oem bearings with skf.
#2
Old and In the Way
iTrader: (13)
FYI -
This info if from my archives from the old "big list" not sure of the original source of this info but I know it is at least 6 years old. I'v had no personal experience with the referenced "aftermarket" bearings.
"I was having trouble deciding between a bearing kit from NOK or the parts from Mazda. I went the Mazda route and I have a parts list for those of you looking to go to a bearing house."
Mazda PN *********** manufacturer PN
R501-17-204 ********** NSK TM 3/32
R501-17-295 ********** NSK TM307
R501-17-290A ********* NTN NKI 255820-5NR
9960-66-3563 ********* NTN 63/28C3
M505-17-306 ********** NSK NTF 025-57
R521-17-299 ********** NTN TM63/22C3
This info if from my archives from the old "big list" not sure of the original source of this info but I know it is at least 6 years old. I'v had no personal experience with the referenced "aftermarket" bearings.
"I was having trouble deciding between a bearing kit from NOK or the parts from Mazda. I went the Mazda route and I have a parts list for those of you looking to go to a bearing house."
Mazda PN *********** manufacturer PN
R501-17-204 ********** NSK TM 3/32
R501-17-295 ********** NSK TM307
R501-17-290A ********* NTN NKI 255820-5NR
9960-66-3563 ********* NTN 63/28C3
M505-17-306 ********** NSK NTF 025-57
R521-17-299 ********** NTN TM63/22C3
#3
Junior Member
Join Date: Aug 2006
Location: Rochester, MN.
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
SKF was and maybe still is one of the biggest bearing manufacturers in the world and although I have not had a chance to use them on my FD, I've had great success with them since the late 1960's. Make sure they are genuine though since there are a lot fake autoparts around.
#4
Senior Member
Thread Starter
Thank you for answer me
Finaly the news is that I have to replace all the bearings from my tranny so I will buy skf bearings.I hope to find all the bearings in skf otherwise I have to go from mazda and wait about 30 days.
Finaly the news is that I have to replace all the bearings from my tranny so I will buy skf bearings.I hope to find all the bearings in skf otherwise I have to go from mazda and wait about 30 days.
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM