3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Radio antenna coax wire

Thread Tools
 
Search this Thread
 
Old 10-11-01, 03:23 PM
  #1  
Senior Member

Thread Starter
 
ronarndt's Avatar
 
Join Date: Oct 2001
Location: Catlett, VA USA
Posts: 667
Received 13 Likes on 8 Posts
Angry Radio antenna coax wire

Has anyone replaced the coaxial cable from the radio to the rear antenna? While re-positioning my PFS PMC, I drilled a hole through the carpet into the transmission hump area without checking what was underneath. Yeah, I know- dumb! But how many times have you done this and lucked out. This time I apparently drilled right into the radio cable, also right at a spot where it was fastened with a plastic clip, otherwise it would have probably squirmed out of the way of the drill bit. The radio reception went bad after this. I finally pulled up the carpet from the passenger side and saw the hole in the cable. Removing the sheet metal screw from the hole helped a little, but I suspect I cut most of the inner wires. Is the carpet split under the center console, or is it one piece from door sill to door sill? It really is stiff carpet and can't be pulled out of the way easily to get at the cable. I'm hoping someone has a suggestion.
Ron A.
Old 10-11-01, 03:51 PM
  #2  
IRS 4 Life

iTrader: (12)
 
Bacon's Avatar
 
Join Date: Feb 2001
Location: Sicklerville, South Jersey!!
Posts: 2,634
Likes: 0
Received 2 Likes on 2 Posts
arround the shifer theres a split in the carpet...just get soem wire soder and tape and rig it up...no sense pullin a new antena wire when u can hop arround it...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM



Quick Reply: Radio antenna coax wire



All times are GMT -5. The time now is 09:50 AM.