Race for 300$
08-19-02, 08:09 PM
#1
LS Powered
Thread Starter
iTrader: (2)
Join Date: Mar 2002
Location: Montgomery, AL
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Race for 300$
Today as I get out of my friends car a kid named troy pulls up in a Black Auto 97 Z24 Cavy.. He told to meet him on september 20th to race him. He said he was going to put hearders and a supercharger on 
.. I am about to order a motor tomorrow with a Race Port (step above of street port i believe) and 3mm seals. All I will have on her when I install the motor is dp,cb,intake, and pulleys. I am getting a PFC and a midpipe when I get the money. What do you think I should rwhp and crank hp wise with just the mods after i install the new motor? Im not to worried I just want to be able to wave as I pass :-D
Josh
.. I am about to order a motor tomorrow with a Race Port (step above of street port i believe) and 3mm seals. All I will have on her when I install the motor is dp,cb,intake, and pulleys. I am getting a PFC and a midpipe when I get the money. What do you think I should rwhp and crank hp wise with just the mods after i install the new motor? Im not to worried I just want to be able to wave as I pass :-DJosh
08-19-02, 10:05 PM
#6
Senior Member
Join Date: Apr 2002
Location: New Orleans
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Question, how much of a head start are you giving this poor fella?
I dont think it will be a match at all. I took out a 00 Cav Z24 with ease in my TII. I think you will have plenty of time to waive.
I dont think it will be a match at all. I took out a 00 Cav Z24 with ease in my TII. I think you will have plenty of time to waive.
Trending Topics
08-19-02, 10:35 PM
#9
LS Powered
Thread Starter
iTrader: (2)
Join Date: Mar 2002
Location: Montgomery, AL
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
haha it has 2.7k i think fomr the dyno.. it was done to break it in only! So the motor is broken in and the seals are set! It will be ready when i get it to do some running! Ill treat it good for a week or so just to make sure all is well!
josh
josh
08-20-02, 09:57 AM
#13
Senior Member
Join Date: Jan 2002
Location: blah
Posts: 733
Likes: 0
Received 0 Likes
on
0 Posts
new motor
Originally posted by neoamd
haha Im seeing it as a downpayment towards a PFC
haha
haha Im seeing it as a downpayment towards a PFC
haha
08-20-02, 04:37 PM
#14
LS Powered
Thread Starter
iTrader: (2)
Join Date: Mar 2002
Location: Montgomery, AL
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Im getting a power FC bvefore I run her.. hard that is.. ill shift below 3k so there wont be much boost there.. also he is supercharging.. he bought 7,000 worth of parts last night!!! Well his dad bought them for him!?!? ****** little rich kids 
I cant lose.. so its a PFC, Midipipe, FMIC, Octane 114, and 19psi on the twins. This will be only one run!
Think Ill be safe? Ill have 1600cc secondaries also..
Where should these mods land me? (rwhp and 1/4 mile time)
Josh
I cant lose.. so its a PFC, Midipipe, FMIC, Octane 114, and 19psi on the twins. This will be only one run!
Think Ill be safe? Ill have 1600cc secondaries also..
Where should these mods land me? (rwhp and 1/4 mile time)
Josh
08-20-02, 05:14 PM
#15
Full Member
Join Date: Jan 2002
Location: mass
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
haha this is to funny
haha does your friend think he has a chance? haha i killed one the other day and it had some stuff under the engine. i killed him with my 1990 300zx non turbo. u should fly by him with no problem even with a supercharger those cars are dirt slow. peace
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM