Quick question about CatchCan install
#1
Full Member
Thread Starter
Quick question about CatchCan install
I'm installing a universal mishimoto oil catch can in my 2002 FD3S and just want to be sure I'm routing it properly seems I can't find any specific image of the hoses going to the catch can just a diagram I found in the forum.
Are these the 2 hose I should reroute to the catch can? the first one from the oil filler neck ( it have a cap and a hose going down, I assume its the hose going down that should enter the catch can) And the exit hose from the catch can to the hose from the primary intake ( hose closer to the primary turbo) Also what you guys do with the hardline? just leave it there?
Are these the 2 hose I should reroute to the catch can? the first one from the oil filler neck ( it have a cap and a hose going down, I assume its the hose going down that should enter the catch can) And the exit hose from the catch can to the hose from the primary intake ( hose closer to the primary turbo) Also what you guys do with the hardline? just leave it there?
#2
It Just Feels Right
iTrader: (11)
Yes, connect it between the oil filler neck and the primary turbo. The stock line on the oil filler neck that points down is the line that routes to the primary turbo so you can connect it between these two points, or you can run a new line from the primary turbo to the catch can and connect back to the oil filler neck.
See: Remove PCV Valve
See: Remove PCV Valve
Thread
Thread Starter
Forum
Replies
Last Post
schctrg
2nd Generation Specific (1986-1992)
11
09-03-16 10:34 AM