Microtech primary injector size . and idle
#1
Full Member
Thread Starter
primary injector size . and idle
So im pulling my motor due to a oil line that blew off on highway.
The previous owner told me that he had 850 primarys and 1300cc secondary s. After removing the injectors I found 1200cc primary s w 1300 cc sec. On e85 it would only idle good at 11.8 to 12.4 @1100 rpm. Not horrible but it could be better. Would I be better to run id 1000 pri. Id 2000 sec.
I have a lt10 s.
Anyone run theese injectors w microtech w good luck?
Let me know what you guys think
The previous owner told me that he had 850 primarys and 1300cc secondary s. After removing the injectors I found 1200cc primary s w 1300 cc sec. On e85 it would only idle good at 11.8 to 12.4 @1100 rpm. Not horrible but it could be better. Would I be better to run id 1000 pri. Id 2000 sec.
I have a lt10 s.
Anyone run theese injectors w microtech w good luck?
Let me know what you guys think
Thread
Thread Starter
Forum
Replies
Last Post
jd88
New Member RX-7 Technical
1
04-20-16 01:24 PM