Clacor

iTrader: (3)

Guys,

Can I use the stock IAT threaded hole to get vacuum to the Brake Booster ??

I mean use the right NPT / Barb fitting to plug the Brake Booster vacuum hose ??

I have a Fast Reacting IAT located at the intake elbow, so the stock sensor is still in its location only as a plug.

Is it big enough ?? Is the location Ok to get vaccum for the BB ??

Only purpose for this is to clean the firewall....

Thanks a lot..!!!

Clacor

iTrader: (3)

Anyone sees an issue on this ??

Thanks..!!

XLR8

iTrader: (52)

I see no issue. It's virtually the same diameter as the other port. Very innovative.

Clacor

iTrader: (3)

Thanks, I guess am gonna have to try...

I´ll get a 45° Fitting to point the hose to the firewall...

Thanks..!!

Mrmatt3465

iTrader: (10)

Honestly all the brake boost line does is draw vacuum for the manifold. As long as you still have it plumbed to the manifold post throttle body I don't think you should have an issue. Seems like an easy way to tuck that large vacuum line