3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

QUICK!!! Help!

Thread Tools
 
Search this Thread
 
Old Aug 31, 2002 | 03:54 PM
  #1  
nerx's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 43
Likes: 0
From: Omaha, NE
Exclamation QUICK!!! Help!

Was looking around in my engine bay b/c I have been having boost issues, and noticed that a hose which is connected to the right side of my air box (if looking at the enging from the front of the car) isn't attached to anything besides the air box. Is this right? Surely it needs to be attached somewhere but I cannot find where. Any help would be appreciated. I have only had my FD for about 4 weeks so lahman's terms please. Thanks in advance.
Reply
Old Aug 31, 2002 | 03:59 PM
  #2  
Far North RX-7's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 16
Likes: 0
From: Alaska
Do you have a hose running from the air pump to the air box? Any chance of a pic?
Reply
Old Aug 31, 2002 | 04:03 PM
  #3  
Far North RX-7's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 16
Likes: 0
From: Alaska
I see you are still online. I will hang around for a few minutes to see if you reply. We should be able to figure this out in a couple of minutes.

Gary
Reply
Old Aug 31, 2002 | 04:26 PM
  #4  
paw140's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 1,668
Likes: 0
From: Hattiesburg, MS
On my car, there is a hose that attaches to the right side of the air box, goes straight down, makes a 90 degree turn towards the passenger side, and just ends there. I believe this is normal.
Reply
Old Aug 31, 2002 | 05:01 PM
  #5  
JONSKI's Avatar
5yr member, joined 2001
Tenured Member 15 Years
 
Joined: Dec 2001
Posts: 908
Likes: 1
From: Marco Island, FL
Yes it is normal. It helps muffle the "MOO"ing noise from the air pump.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Logan Reinisch
General Rotary Tech Support
44
Sep 17, 2018 12:20 PM
zyph3r
Canadian Forum
10
Sep 16, 2018 07:14 PM
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
TeamRuffRacing
Adaptronic Engine Mgmt - AUS
1
Sep 30, 2015 08:13 PM




All times are GMT -5. The time now is 05:00 AM.