JDMRevolution

iTrader: (6)

How much do these run?

wthx100

Those dont look like they recline or tilt to me.

SLOASFK

iTrader: (5)

$3100 for the pair, according to http://www.fdnewbie.com

And I do believe the RZ and Spirit R seats tilt.

sandsurfr2

I have tried to contact FDnewbie...I want to find what Bride seats fit

SLOASFK-I didnt think they tilt but im not sure...

Anyone know what Bride seats fit

And FDnewbie if you see this I email you, but if you could email me at
sandsurfr2@yahoo.com I need some seats and some other things..thanks alot

Mahjik

iTrader: (1)

Ramy (FDNewbie) will get back to you. He gets a lot of mail so sometimes he's not able to get to all of them in a single day. Check this thread about seats:

https://www.rx7club.com/interior-exterior-audio-26/fd-aftermarket-seats-practical-seat-thread-453449/

ALNY93R1

iTrader: (12)

I like the way my Corbeau Cr1's fit in my Fd. The seat has a decent hold also.

YOUWSH

They don't tilt. I've sat in two different RZ's and unless I was drunk on both occasions they only move forward and backwards.

DJF(NJ)

iTrader: (6)

The tilt function is in the rails. There maybe some sets that come without the tilt function in the rails. Mine have them and to my knowledge, the ones Ramy sells have them too. (I'd actually be interested in the non tilt rails if they could be set at a desired position. They add a bit of weight to the seat and I only use 2 of the 4 available positions.) Basically to the right of the handle that moves the seat forward and back, is another handle that allows you to tilt the whole seat in the 4 positions. If it wasnt such a PITA to take my car out of the garage I would take some pics to show what the bottom looks like and the angles for tilt.

RX7 RAGE

iTrader: (22)

Yep, I have the RZ seats and the tilt function is on the rails.

JHew84

iTrader: (9)

Has anyone ever tried to fit a corbeau forza, or fx1 pro into an FD?

StealthFox

iTrader: (2)

wow what a pain i never even knew this...has anyone heard about fitment for the bride zeta III? its their standard production bucket seat so i assume someones tried these

sandsurfr2

Alright I have been sick as crap but.....


What Bride seats fit? I know Bride makes rail for the FD....Does anyone know if the Bride Brix (i think they are called that)


I really want some Bride seats, basically because out of all the different seats I have owned I just like them...

FDnewbie if you see this let me know what kind of Bride seats you got for that one guy and let me know if you can get them...I would like to get some seats pretty soon...

FDNewbie

iTrader: (10)

Guys, right now I'm SWAMPED. So please, I'd REALLY appreciate it if instead of asking me general questions like "what Bride seats fit," you search, find the answer, decide on one (or two) seats you DEFINITELY want, then email me the order. So much of my time goes to doing research for ppl in rare/hard to find parts, so lets not add to that info that's readily available right here on the forum

Thanks,
~Ramy

sandsurfr2

FDnewbie- I cant find out which ones fit, Im getting different answers? I want to order seats but I need to talk to you about how much certain seats cost and what ones fit?

Can you please help me? I will call you if that is better...I started this thread because I wasnt able to find the for sure answers....

Please let me know asap I want to order them, Im not just wasting your time and not going to order.....Thanks alot




Bobby,
313-733-7457
(just in case you can call? but im in the hospital at the time because Im sick as crap)

Mahjik

iTrader: (1)

Look through this thread:
https://www.rx7club.com/interior-exterior-audio-26/lets-see-pics-aftermarket-seats-installed-fds-532394/

Speedworks

Sparco Raodster II; not reclineable but an alround seat
fits if you take the time to position it

Rotary_Rocket!

iTrader: (2)

RX8 seats don't fit. I tried it. I have a pair sitting here collecting dust...

Sparco "Road" seats fit and they are cheap, I think about $300. But they do not recline. Good cheap track seats

sandsurfr2

Mahik-I have looked through that thread, thanks tho

And both of those Sparco seats arent really what im looking for..


Does anyone know if the Sparco Torino's, or Milano's fit???


And FDnewbie I was just wondering what Bride seats you said you had ordered for a customer were? The ones you said you found in Japan for a better deal? What are they and how much?

And FDnewbie I wanted to know when you order seats like the oem recardos or what not do they come with brackets??

Mahjik

iTrader: (1)

The Torino will fit, but its tight. You might have minor issues with the seat controls on the side, but they do fit.

antiSUV

iTrader: (10)

The OP said he wanted new seats becuase he hates his tan seats. He suggested buying aftermarket seats as a solution to get rid of them. Why has no one suggested reupholsterying his stock seats? He can get new seat upholstery from Leatherseats.com and have it installed for between $650 and 750.

sandsurfr2

I know I can and I might still....but I was really hoping to buy some seats...but as it looks im not going be able to find seats that fit that will be comfortable for daily driving....


Mahjik-And I think they sit high dont they?


FDnewbie-please contact me I want to fiqure out what seats I want so I can order

Mahjik

iTrader: (1)

That's all depends on how its mounted. I believe Bride and MemoryFab both have "Super Low" mounting rails which fit the FD. Many people pair other types of seats with those rails.

FDNewbie

iTrader: (10)

I understand; the threads on this form have more information on them that what I know. I'm not a seat expert by any means; that's why I require that ppl do their research before ordering, because I don't know and can't verify whether seats ppl want will fit or not.

Don't worry, I don't feel you're looking to waste my time, but I won't be able to provide you with any further info re: fitment other than what's already posted on the forum. I only take care of the back end of the deal (pricequoting & ordering).

Oh and I wouldn't post your # on a public forum FYI. Not a good idea

I've ordered several seats for customers, so again it comes down to which seats you are interested in. And as always, the tradeoff for lower prices from overseas is a longer wait time for delivery. So keep that in mind.

Well I don't order OEM Recaros. They're over $8,000 new. I purchase used sets in excellent condition, most of which - but not all - come with rails. The price reflects this accordingly.

Most Bride (and even Recaro) seats come with either regular or ultra-low profile rails; you can specify which one you want.

Once you figure out which seats you'd like, drop me an email at Info@FDNewbieImports.com and I'll try and take care of it ASAP.

Thanks,
~Ramy

sandsurfr2

Thanks alot both of you guys...

Yeah and my phone number, I dont care if anyone wants to call me, Already random old black women call my phone thinking im some old dude on some dating service....so im welcome to whatever lol....

ANd what do you guys think my best bet would be considering im a taller and not skinny but not fat dude.....im a 32-34 waist ????



FDnewbie-I will let you know asap

sandsurfr2

Mahik-And will torino 2's fit without problems other than what you said? and do they sit high or hit the door?? and does sparco make mounting brackets for the FD?