Question on boost gauge
#1
Senior Member
Thread Starter
Join Date: Jun 2004
Location: Lincoln, Nebraska
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Question on boost gauge
I just got my boost gauge in the mail and got it all hooked up. Autometer Sport Comp (mechanical) I went out to see if it had the 10-8-10 pattern and it did, then after that i got on it again in 2nd gear and it went 10-5-10, is that alright or is there something seriously wrong because it did have a 10-8-10 a couple of times, i tried it about 4 times.
#2
a vacuum hose probably popped off somewhere... here is some good info http://www.autosportracetech.com/RX-...leshooting.htm
#4
Senior Member
Thread Starter
Join Date: Jun 2004
Location: Lincoln, Nebraska
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
I did a search on that website TwinTurbo SE7EN Alot of good info. I'll check somethings out and see if there is a slight leak anywhere, I never did zip-tie the hoses onto the T-fitting because they went on pretty tight, maybe i will do that and see if that makes a difference maybe it is leaking a little around that.
#5
Moderator
iTrader: (7)
Originally Posted by MazdaSpeed93
I did a search on that website TwinTurbo SE7EN Alot of good info. I'll check somethings out and see if there is a slight leak anywhere, I never did zip-tie the hoses onto the T-fitting because they went on pretty tight, maybe i will do that and see if that makes a difference maybe it is leaking a little around that.
Thread
Thread Starter
Forum
Replies
Last Post