Question about RHD interior
#1
Up the Irons
Thread Starter
Join Date: Oct 2008
Location: Oki, Japan
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Question about RHD interior
Does the gauge cluster shroud, the plastic curved dash piece that breaks o so easily if removed wrong, on a RHD FD the same as on a LHD FD? Basically could I buy piece of a LHD and install it on a RHD?
#5
Rotary Freak
I've checked this before, part numbers are the same left to right....if you're talking the part with the 3 push-in spring clips attaching the binnacle to the dash.
#7
Up the Irons
Thread Starter
Join Date: Oct 2008
Location: Oki, Japan
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#17
Rotary Freak
Ah yeah, it was actually the vents that interchange - group buy on here 4 or 5 years back. I remember speaking to Mr Crowe about the binnacle at the time - wasn't cheap even over there, but cheaper than buying from Japan.
RH one in texture is F132-55-420B, got one second-hand from Yahoo before every man and his dog began bringing in half-cuts and pushed down prices. Might be prudent to stock up on trim, as that's usually the first thing to go NLA too.
RH one in texture is F132-55-420B, got one second-hand from Yahoo before every man and his dog began bringing in half-cuts and pushed down prices. Might be prudent to stock up on trim, as that's usually the first thing to go NLA too.
#18
Passenger
Posts: n/a
Mine is broken to pieces and i managed to find all of the broken pieces and fiberglass under to keep them all in place. It looks pretty bad, but its better than having a hole there. Once of theses days I will pull it out and fiber glass over it to make it even, but it will then be smooth cause I can never get the original texture on any interior pieces.
#20
Rotary > LSx
iTrader: (17)
Spirit-R Type A 30/1500. Grab some more pieces for your collection