question about the 3 fuel lines?
question about the 3 fuel lines?
currently iam putting the motor back into my car and iam about to start plumbing it up. my problem is that when I disconected the 3 fuel lines on the drivers side of the motor I didnt mark which hard lines they were supposed to go into. If anybody has a diagram or any info on which one goes where it would be much appreciated.
Ee / Cpe
Joined: Jan 2003
Posts: 2,843
Likes: 2
From: Gaithersburg, MD / WVU
Originally Posted by Zyon13B
I got your fuel:
The one closest to the middle of the bay is the charcoll can, the middle is the return and the one closest to outside is the feed.
And it usually feeds the primaries first.
The one closest to the middle of the bay is the charcoll can, the middle is the return and the one closest to outside is the feed.
And it usually feeds the primaries first.
Import Connoisseur
Joined: Oct 2003
Posts: 1,335
Likes: 1
From: All over the place
If your running the stock hoses you should notice 2 different clamps on the fuel lines. the hose with the smaller clamp is for the charcoal canister. The hoses with the larger clamps are return/feed. You can always prime the fuel pump to see which is the feed line. Be sure to stick the 2 hoses you unsure of in a 20oz + bottle cuz the fuel comes out fast! You don't want a mess of fuel especially if your waiting to crank her over!
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM