solo1seven

Hi,

I was searching and found install tips on the profec B but could use some further clarification,

"Now its time to hook up the black box. Look down at the turbo and you will notice 2 small hoses that run from the actuator to the wastegates. The outside hose is longer than the other. Remove the smaller of the hoses, which is the inside hose. Run a hose from the Actuator to the In on the black box and from the OUT on the box to the wastegate"

Are the two small hoses the ones with the restrictor pills in them? do i remove the one line and leave the prespool connected with the stock pill?

Also, is it possible to insert a T into the autometer boost guage line without causing too much restriction for the guage to function correctly?

Thanks again,

Andrew Wojteczko