I recently broke the bolts that hold up the ppf so i couldnt drive the car i waited til i got paid and bought the bolts well i waited about two weeks cause of work and just being lazy. Well it was a nice day and i decided to put the bolts and nuts on when i tried to start the car to move it to the garage it would start to crank but wouldnt start and the more i tried the more it sounded lower and lower til it just went click click I waited like an hour and tried again and it started to turn then got lower again the went to click click again. I dont know what the problem is I have had this happen before but after a few tries it starts it wont start this time. Can some one please help me
drew

 

Sounds like your battery's gone. Did you try to jump-start it?

 

95 silver? you lucky dog!

 

sounds like flooded and plop battery to me,,, do search on unflooding.

 

Agreed... try jump starting it.

 

If you are lucky, jump start will get it going.
My guess is you have a loaded up combustion chamber, like with oil fouling on the plug and all.
Read the threads on unflooding, like tiger18 says.
When this happened to me, the battery tested bad; and the battery selling mechanic said the Rx was sensitive to low voltage for getting a start. I think it was mostly loading.
The mechanic cleared the loaded engine by using starter fluid via a nipple on the intake and then cranking for about three minutes until running smoothly.

 

thank guys I really want to get it to drive as i am getting a rebuild and a 1/2 bridge done this month and going single the month after man i will look for these threads buti appreciate the help. later drew