Primary Turbo's level drops off...
#1
Rotary Freak
Thread Starter
Primary Turbo's level drops off...
I just noticed my primary turbo hits the target boost level and it just drops off to about .4 on the PFC commander. Just before the switchover it picks up a bit to about .55
It does it 2 or 3 times and then its gone. I do notice that after a few pulls when it warms up it lags a lot. Its like a 2 second wait before it builds boost.
I know the primary is pushing some oil and thought that could be it.
I also came up with a theory, a crack in the manifold? might be bleeding off some of the boost...
Also, does anyone buy/need a core?
It does it 2 or 3 times and then its gone. I do notice that after a few pulls when it warms up it lags a lot. Its like a 2 second wait before it builds boost.
I know the primary is pushing some oil and thought that could be it.
I also came up with a theory, a crack in the manifold? might be bleeding off some of the boost...
Also, does anyone buy/need a core?
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM