Is there any aftermarket primary fuel rail that will allow newer top feed injectors such as ID 725 or the new ID 1050X and also allow you to keep the stock fuel lines, the rat's nest, and the pulsation damper(not that important if it has to go)? I currently have the stock primary rail with RP's secondary rail with 34 mm height injectors which allows me to keep the idle control and the rat's nest.
Thanks
Mike

 

Just to be clear, you say idle control, the ISC is on the back of the UIM and is out of the way of the fuel lines. The ACV (air control valve) that directs air pump air is what is in the way most times for fuel rails.

That said, I'm not sure if there is a bolt on primary fuel rail that will run with aftermarket injectors. Hope someone else will chime in here...

Dale

 

Sorry. Dale is right, I meant the ACV. I still have the air pump.
Mike