3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Present for the FD...

Thread Tools
 
Search this Thread
 
Old Dec 13, 2006 | 01:12 PM
  #1  
yuichiror's Avatar
Thread Starter
Rotary Freak
Tenured Member 10 Years
iTrader: (1)
 
Joined: Oct 2003
Posts: 2,506
Likes: 0
From: Hampton, Va
Present for the FD...

Well the wife wants to know what I want for Christmas and I have no idea what I want . What might be a good gift for me for the FD? Say like around $500. I would go for a tune at PFS, but I need to look at a boost issue first(need to find time to figure out why I'm losing boost intermittantly when the secondary comes online).
My FD already has
a PFS intake and SMIC,
RB single catback,
generic dp,
newish stock rad(only 20k on it),
Tokico's all around,
not sure if the springs are stock or not,
PFC and commander,
new pillow ball bushings(need to install them),
silicone vac lines,
most of the check valves replace(Thanks Dale!),
GReddy elbow,
aftermarket head unit.
The only complaints I really have with the car is a squeaky front suspension, dulling paint and my boost issue.
My FD is my weekend car, no track cept a little autocross, and I'm not into exterior mods(cept maybe 99 spec tail lights and spoiler).
Suggestions anyone?
Reply
Old Dec 13, 2006 | 01:24 PM
  #2  
moconnor's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (14)
 
Joined: Jul 2003
Posts: 4,678
Likes: 97
From: Bay Area, CA
Suggestions:

Datalogit.
New rubber bushings. (I'm selling an entire front and rear control arm set in the classifieds for $500. )
Pair of Hallmann manual boost controllers. (May help you resolve the boost issue too.)
Mazdaspeed short shifter.
Reply
Old Dec 13, 2006 | 01:30 PM
  #3  
TwilightRotary's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (3)
 
Joined: May 2006
Posts: 569
Likes: 0
From: Hamilton, Ontario
new paint job, although you may have to go halfsies with her on it.
Reply
Old Dec 13, 2006 | 01:33 PM
  #4  
moconnor's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (14)
 
Joined: Jul 2003
Posts: 4,678
Likes: 97
From: Bay Area, CA
Originally Posted by TwilightRotary
new paint job, although you may have to go halfsies with her on it.
A new paint job will cost $5 to $7k - unless he goes to Maaco.
Reply
Old Dec 13, 2006 | 01:37 PM
  #5  
TwilightRotary's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (3)
 
Joined: May 2006
Posts: 569
Likes: 0
From: Hamilton, Ontario
damn you guys are getting screwed. theres a few places around here where you can get a good one for $1-2K. perhaps not car show winning good, but still a good job none the less.
Reply
Old Dec 13, 2006 | 01:38 PM
  #6  
VegasFD's Avatar
Wishin I Still Had The FD
Tenured Member 15 Years
 
Joined: Sep 2005
Posts: 1,420
Likes: 1
From: Las Vegas, NV
Maybe a Supra fuel pump and 1300cc secondaries. Couldn't hurt to do that before the tune. Also, I second the Datalogit, it's a great thing to have.
Reply
Old Dec 13, 2006 | 01:56 PM
  #7  
FJDRX7's Avatar
Back to the DrawingBoard.
Tenured Member 15 Years
iTrader: (32)
 
Joined: Aug 2004
Posts: 2,526
Likes: 0
From: Va
cool Yosh, get a single turbo kit, fuel rails and all the goodies for it, is more that 500 but why not celebrate christmas earlier for the coming years and you forgot to mention me on the vacum lines job!!!!! sad
Reply
Old Dec 13, 2006 | 02:12 PM
  #8  
yuichiror's Avatar
Thread Starter
Rotary Freak
Tenured Member 10 Years
iTrader: (1)
 
Joined: Oct 2003
Posts: 2,506
Likes: 0
From: Hampton, Va
Thanks for the suggestions guys and yeah, FJDRX7 did my vac line job and FDNewbie got me my elbow.
Reply
Old Dec 13, 2006 | 02:55 PM
  #9  
DCrosby's Avatar
No it's not Turbo'd
Tenured Member 20 Years
 
Joined: Jun 2002
Posts: 2,511
Likes: 2
From: Los Angeles, Ca
HKS Twinpower ! Best Fuel Economy / Performance Mod, once all the reliability stuff is done...
Reply
Old Dec 13, 2006 | 07:33 PM
  #10  
yuichiror's Avatar
Thread Starter
Rotary Freak
Tenured Member 10 Years
iTrader: (1)
 
Joined: Oct 2003
Posts: 2,506
Likes: 0
From: Hampton, Va
Hmmm, suspension or HKS TP.... BTW, how do I tell if I have aftermarket springs????
Reply
Old Dec 13, 2006 | 07:45 PM
  #11  
VegasFD's Avatar
Wishin I Still Had The FD
Tenured Member 15 Years
 
Joined: Sep 2005
Posts: 1,420
Likes: 1
From: Las Vegas, NV
I have a set of H&R's on the way, I'm still deciding whether or not I'm going to use them.
Reply
Old Dec 13, 2006 | 07:47 PM
  #12  
Full Member
Tenured Member 15 Years
 
Joined: May 2003
Posts: 171
Likes: 0
From: PA
hmmm, how about a leather interior? see my post
Reply
Old Dec 13, 2006 | 07:54 PM
  #13  
yuichiror's Avatar
Thread Starter
Rotary Freak
Tenured Member 10 Years
iTrader: (1)
 
Joined: Oct 2003
Posts: 2,506
Likes: 0
From: Hampton, Va
Originally Posted by psquare8
hmmm, how about a leather interior? see my post
, I already replied to your post. Must smell nice, but right now I'm looking at performance upgrades and an ashtray replacement with that pocket/pad thingy.
Reply
Old Dec 13, 2006 | 07:58 PM
  #14  
jojodotcom's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (6)
 
Joined: Jan 2005
Posts: 390
Likes: 2
From: Vancouver
What about a Fluidyne rad for $300-400 ?
Reply
Old Dec 13, 2006 | 08:28 PM
  #15  
yuichiror's Avatar
Thread Starter
Rotary Freak
Tenured Member 10 Years
iTrader: (1)
 
Joined: Oct 2003
Posts: 2,506
Likes: 0
From: Hampton, Va
Actually I thought I'd grab one of these this spring:
http://www.radiatorworld.com/radiato...no=15107&cat=1
Cheap and good.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andrew777
Canadian Forum
0
Sep 23, 2015 09:47 PM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM
IB Cristina
West RX-7 Forum
0
Aug 20, 2015 05:46 PM
4sfeedit
3rd Generation Specific (1993-2002)
10
Aug 16, 2015 01:42 PM




All times are GMT -5. The time now is 06:17 AM.