When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Wanted to share a cheap solution for a cup holder and Premix holder.
Firstly I thought it best to prepare my premix and put it into a rootbeer bottle (Had put it into a beer bottle at one point but realized that would not look good if I was pulled over). I just got a small squirt bottle from the dollar store and marked it for 10 gallons worth of premix. Then I put two bottles of it into my premix/cupholder pictured below.
The cupholder was just a piece of sturdy styrofoam I had. I cut measured holes in it, then painted it, then added some decrative tape to the top along with an Efini emble. I had laying around.
It works great, I just buckle it into my back (useless) seat and I can put my coffee cup back there as well in the morning. (There is another hole in the back left)
Doesn’t apply to the OP since he has seats instead of bins, but since he brought the subject up, I’ll give a plug to JP3’s solution to carrying around premix. https://jp3motorsports.com/products/...hd-driver-side
I bought their set-up a couple years ago and it works great. Measured and marked out ounces with a Sharpie on the side of the included bottles. I use two for premix and two for spare distilled water for my AI system in the event I run the tank out and a Walmart or Walgreens isn’t convenient. I premix at half-rate with the OMP so the two bottles last twice as long.
. 