sup fellas, like the title states ive removed my ppf due to 8.8 rear end swap .was wondering what was done to replace the 2 exhaust hangers that were on the ppf .. any pictures with specific places to weld in new hangers would be appreciated

 

No need to weld if you don't want to. There are a lot of different ways to approach this. The simplest method would be to add 3 m8 nutserts in a triangle shape and make a bracket. The hangers on the z32 slip in on the exhaust side and the chassis side uses a bolt. So you could make a steel L bracket, nut and bolt the chassis side of the hanger and then install the exhaust side of it like normal.

Theres a million different ways to fix this issue but I think this is the simplest method. Considering the Ford rear, I'll imagine drilling a few holes in the bottom of the car wouldn't bother you

 

Funny thing... I don't mind gentle massaging of the bins area to clear the Ronin kit, as I can pop that all back out if needed. But drilling new holes isn't something I like to do.

 

Well alright then lol welding to the chassis it is

 

You should be able to create some hanger from the 2 tunnel brace mounting point, shouldn't be too difficult.