PPF clunking sound
#1
Junior Member
Thread Starter
Join Date: May 2014
Location: oregon
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
PPF clunking sound
Well, i think i just tweaked my PPF on the 93, anyone have good advice for re fitting it and reinforcing it? pretty out of funds at this point, and the car makes a very noticble clunking sound going down the road, would love to see your guys take on reinforcing it
Thanks, Dan
1993 rx7 single turbo
tuned 395 hp
i dont do burnouts ps
Thanks, Dan
1993 rx7 single turbo
tuned 395 hp
i dont do burnouts ps
#4
Junior Member
Thread Starter
Join Date: May 2014
Location: oregon
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
I will try to explain my situation as best I can.
I was warming up my car and drove it around my neighborhood for a bit. Got into boost then went for a small cruise. While going down the road suddenly a repeated clunking sound occurred. The sound does change with the cars rate of speed. It also slightly shakes the wheel.
It was loud enough that I would think people walking on the sidewalk could definitely hear it.
I was warming up my car and drove it around my neighborhood for a bit. Got into boost then went for a small cruise. While going down the road suddenly a repeated clunking sound occurred. The sound does change with the cars rate of speed. It also slightly shakes the wheel.
It was loud enough that I would think people walking on the sidewalk could definitely hear it.
#5
Rx7 Wagon
iTrader: (16)
If you get it up in the air, a catastrophic failure of the ppf should be visible. Take a flashlight and look real good. I would also check your wheel bearings.
There are reinforced options for the ppf, but they're not readily available or require shipping it out for modification. You'd be better off getting a new stock ppf, which are fairly common. The first one lasted 20yrs, right?
There are reinforced options for the ppf, but they're not readily available or require shipping it out for modification. You'd be better off getting a new stock ppf, which are fairly common. The first one lasted 20yrs, right?
#7
Junior Member
Thread Starter
Join Date: May 2014
Location: oregon
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
I havent reinforced my ppf, just heard rumors about doing it.
is there anyway i could have tweaked my frame?? i dont see that being possible but if i did tweak my frame what are my options?
thanks, Dan
is there anyway i could have tweaked my frame?? i dont see that being possible but if i did tweak my frame what are my options?
thanks, Dan
Trending Topics
#8
Junior Member
Thread Starter
Join Date: May 2014
Location: oregon
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
and if anyone has some pictures of things i should look at or for that would be very great!
#9
Junior Member
Thread Starter
Join Date: May 2014
Location: oregon
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Thank you to everyone who gave me advice on this.
I went through and got all New bushings in the rear end. (Diff mounts, pillowball, end links) and whatdya know when I play with the drive shaft I get a ton of play and find that the u joints are complete crap.
Ordering the New drive shaft tomorrow and she'll be back on the road in no time! 👍🔧
I went through and got all New bushings in the rear end. (Diff mounts, pillowball, end links) and whatdya know when I play with the drive shaft I get a ton of play and find that the u joints are complete crap.
Ordering the New drive shaft tomorrow and she'll be back on the road in no time! 👍🔧
Thread
Thread Starter
Forum
Replies
Last Post