Power steering due to adjustment bolt FALLING OFF!!!!!
#1
Junior Member
Thread Starter
Power steering due to adjustment bolt FALLING OFF!!!!!
As i was driving, the power steering stopped working managed to get home.
in the engine bay, I not only found my belt came off but also the adjustment pulley!
don't know exactly what the adjustment nut/pulley is called but I've attached a picture from the web. The one on the left within the circled area is missing, with just the bare thread remaining.
Here is the picture of my engine bay:
I don't have a parts manual. I did find this on Atkins rotary.
https://www.atkinsrotary.com/store/9...A1-15-94Y.html
I'd appreciate if anyone you confirm this is the right part.
just for your information, I have not touched the belts around the engine since I bought the car from the prior owner. Has this happened to anyone else before?
in the engine bay, I not only found my belt came off but also the adjustment pulley!
don't know exactly what the adjustment nut/pulley is called but I've attached a picture from the web. The one on the left within the circled area is missing, with just the bare thread remaining.
Here is the picture of my engine bay:
I don't have a parts manual. I did find this on Atkins rotary.
https://www.atkinsrotary.com/store/9...A1-15-94Y.html
I'd appreciate if anyone you confirm this is the right part.
just for your information, I have not touched the belts around the engine since I bought the car from the prior owner. Has this happened to anyone else before?
The following users liked this post:
mazdas4life (11-21-18)
#4
Junior Member
Thread Starter
Ray Crowe CONTACT INFORMATION
For those of you that don't have his contact, here it is from GoodFella:
Roger that
Ray "OG-Rotorstud" Crowe can be reached at Crowe.Ray@aol.com or on his international mobile celly at (703)785-5554
I just ordered a boatload of parts from him for a completely original 33k mile CYM I'm currently working on at Goodfella's Garage
Ray "OG-Rotorstud" Crowe can be reached at Crowe.Ray@aol.com or on his international mobile celly at (703)785-5554
I just ordered a boatload of parts from him for a completely original 33k mile CYM I'm currently working on at Goodfella's Garage
#5
Junior Member
Thread Starter
Gracer - forgot to ask where you go to feed your track appetite, as I see you are in the Bay Area as well. I'm tidying up the car and making it reliable before I consider any track events, but would be fun to be more involved in the RX7 Bay Area community for group gatherings or drives.
Cheers!
Cheers!
Thread
Thread Starter
Forum
Replies
Last Post
latin.pitbull
3rd Generation Specific (1993-2002)
5
09-13-14 11:16 PM
DarkDrakeX
1st Generation Specific (1979-1985)
12
09-26-08 09:05 AM
Manolis_D
Rotary Car Performance
10
04-13-05 01:47 PM