I have secured a low mileage 99 JDM motor? I replaced my ECU with a Power FC which was in my previous motor which was 93. Will my Power FC hook up with the new motor? I heard the pin connections on the ECU are different between the two years. Any help would be appreciated.

 

if you have the 99 wire harness then you will need to get a 99-02 PFC like i had to

 

Can I ask where did you get a 99-01 PFC? Are they hard to find?
I assume this is a series 5 ECU?

Thanks for your help BTW

 

Go to ebay but making sure check on the year before you buy it and the item must in USA
cause i seen one before for $699
good luck...