polishing pics.........
#1
i love boost
Thread Starter
Join Date: Sep 2002
Location: St. Albert Alberta
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
polishing pics.........
TomsRX7 was asking me about pics of my polished UIM and calipers and stuff so here they are, as well some pics of my old s-10 pickup I built. Enjoy!
http://www.imagestation.com/album/?id=4290597195
http://www.imagestation.com/album/?id=4290597195
Trending Topics
#10
i love boost
Thread Starter
Join Date: Sep 2002
Location: St. Albert Alberta
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
I used sand paper and then rouges with a buffing wheel. I started with 80 grit paper, to smooth out all the nasty bumps. Then switched to 120, then 240, 400 and finally 600 grit. Then I used the 8" buffing wheel on a angle grinder( all that I had available) and used white rouge for the first polishing step. Then after that I used blue rouge, which is the high polishing rouge and..... Viola! I takes a bit of time but when your done it is rewarding. The throttle body was a snap. It was really easy to polish since it was way smoother than the UIM.... and what pissed off chick
Last edited by ROTORHP; 03-10-03 at 10:13 PM.